AA Поделиться


A pressure washer surface cleaner is a must-have accessory for anyone who cleans concrete. They can speed up your work and smooth out the final product. There are many choices when it comes to pressure washer surface cleaners and we get a lot of questions about them. Will a large pressure washer surface cleaner help you clean faster? What size nozzles should you use? What causes vibration and friction and how can you eliminate those issues? Are wheels better than floaters?

What size pressure washer surface cleaner is right for me?

When it comes to pressure washer surface cleaners, bigger is not always better. The classic rookie mistake is to buy a 36-inch pressure washer surface cleaner for a 3 GPM machine. Think about a lawnmower with a 36-inch-wide deck. Now imagine a tiny motor trying to spin that giant blade. You might be able to cut a 36-inch swath, but you wouldn’t be moving very quickly because your machine would be underpowered. Pressure washer surface cleaners are similar. Your pressure washer engine powers your system. A larger engine can turn a larger pump that will move more water and create more pressure. Water and pressure combine to spin the bar under the pressure washer surface cleaner and rinse away the grime on the surface. Your pressure washer surface cleaner should produce an even clean streak as you pass it across the surface. A spiral pattern may occur if you are moving too quickly. A smaller pressure washer surface cleaner may not cover a wide swath, but you will able to move faster to cover more areas in less time. Smaller pressure washer surface cleaners are also more maneuverable, and lighter. Surface Cleaner Sizing Chart

The swivel is the Achilles heel of your pressure washer surface cleaner. The force that spins the spray bar is created by the nozzles on the tips. The swivel must be able to move rapidly without generating excessive friction. Professional swivels contain bearings that must be well lubricated to function properly. High-end swivels are generally constructed from stainless steel with tungsten carbide seals. All swivels have a rating for the maximum revolutions per minute, maximum pressure, maximum flow, and maximum temperature. Check the swivel to ensure that it is rated for your machine specifications.

Concrete cleaners such as Clearly Clean X-Treme should not be run through a pressure washer surface cleaner. These alkaline cleaners will cause excessive wear on the internal components of your system.

What causes vibration in my pressure washer surface cleaner?

Surface Cleaner Nozzles for pressure washer are usually 1/8 inch threaded v-jet. A pressure washer surface cleaner will usually have a set of two or four nozzles. Remember to consider this when you set your desired pressure. Say you want to generate 4000 psi and you have a pressure washer surface cleaner that has two nozzles. You would divide your nozzle size in half to split 4000 psi over two nozzles. Remember that pressure must be equal on both sides. Watch out for worn-out nozzles as they may cause excessive vibration.

A common rookie mistake for an underpowered pressure washer surface cleaner is to try and use extremely small nozzles. This results in clogs that will slow you down. High-pressure inline filters are a smart investment to prevent clogs that can occur from debris in your line, but they will not save you if your nozzle is too small.

A high-pressure ball valve fitted with a quick coupler is a great way to speed up your work. Use the ball valve to shut off the flow of water before the trigger gun, snap the line out of the quick coupler, and attach a wand to clean hard to reach areas of gum.

Should I buy a pressure washer surface cleaner with wheels or without?

Wheels or casters can be helpful to prevent fatigue, but sometimes they get in the way. A small floater can sometimes be faster than a pressure washer surface cleaner with wheels or casters because uneven surfaces can catch your wheels and trip you up. Floaters get their name because they use water pressure to float above the surface.

The protective covering over the spinning spray bar known as the housing can be made from ABS plastic, aluminum, or steel. Lots of people like to choose steel because they think it will be more durable, but steel is much heavier. Floating pressure washer surface cleaners such as the Whisper Wash Classic are made from ABS to make them easier to use. Plastic may sound cheap, but you may be surprised to know that ABS plastic is the same material used to make Lego blocks. Anyone who has stepped on a Lego in the middle of the night can attest to their strength and durability.

Recovery ports are available on some pressure washer surface cleaners to help control wash water run-off. They are designed to accept the hose from your vacuum recovery system so that you can suck up the water as you go. You must keep the brush on the rim of the pressure washer surface cleaner in good condition and carefully adjust the height of the deck to ensure a good vacuum seal. A vacuum pressure washer surface cleaner needs wheels or casters to work effectively. As I mentioned, this can sometimes make them harder to operate on rough terrain. The vacuum hose can also limit your range because they lose suction as they get longer. The weight of the vacuum hose can also cause fatigue as it is dragged behind you. Pressure washer surface cleaners with vacuum recovery ports can help you stay in compliance with your local environmental regulations, but you should consider all of the things mentioned above before investing.



Why buy our Pressure Washer Surface Cleaner?

This surface cleaner nozzles attachment provides professional-grade cleaning with its double-spinning nozzle design.

You don’t experience any streaking problems due to its ability to keep nozzles at a fixed height from the surface.

The splash-free skirt keeps you dry while you clean.

You can get the job done up to 4X faster than the usual spray nozzles.

Efficiently clean horizontal surfaces like driveways, garage floors, sidewalks as well as ve

How To Use:

  1. Clear away loose and large debris that could impede the motion of the surface cleaner.
  2. Connect the water supply to the pressure washer
  3. Attach the surface cleaner to the high-pressure hose, much like you would a standard wand assembly, making sure all connections are firmly in place.
  4. Turn on the water and start the pressure washer.
  5. Squeeze the trigger gun - the nozzles under the surface cleaner will begin to rotate and create pressure, allowing the surface cleaner to glide along the surface.
  6. It is important to keep the surface cleaner moving to ensure an even cleaning pattern.


  • COMPATIBILITY: Gaspressure washerwith ¼” quick-connect fitting
  • MAX TEMPERATURE: 140° F (60° C)
  • MAX FLOW: 2.7 GPM
  • SIZE (L x W x H): 15 x 15 x 6.7 in
  • WEIGHT: 3.8 lbs
  • EXTENSION WAND: 1/4" quick connector
23 мая 2020 г. 7:08:52 0 Отчет Добавить 0